Bleeding

 

 

Description

Discolouration of the topcoat, either in the form of a halo, or, in severe cases, a complete colour change. This defect usually only occurs when spraying over red or maroon paint.

Cause

Absorption of pigment from the underlying paint, dissolved by the solvents of the new coat.

 

Prevention

  1. Test the original finish by spraying a small, flatted area.
  2. Use an approved bleeding inhibitor sealant.
  3. Remove any overspray from the surface before painting.

 

Rectification

Rub down to the original finish, seal with a recommended sealer and repaint.

 

 

Other Defects:

Πίσω